MAINTENANCE
KPL:
Clean suction strainer from impurities at least once a year or if needed. Access to suction strainer happens via
tank cap.
Remove nozzle if clogged, clean the strainer and nozzle from dirty with clean water. Change new Teflon tape
onto the threads and fasten nozzle.
Put grease into grease nipples at rotate arm joint once a year.
HPW:
Due to small number of moving parts, in normal operating conditions HPW-pump does not require any other
service, except replacement of sealing or occasionally of water valves, which depends on content of abrasives
in pumping fluid, as well as on cleanliness of hydraulic oil.
Check constantly whether the fluid dropping from pump’s leakage detectors is growing and replace sealing in
proper time to exclude intermixing of hydraulic oil and pumping fluid.
To enable the easy surveillance, pump should be kept clean.
WHEN CARRYING OUT ANY SERVICE DISSASSEMBLING OR REPAIR OF HPW-PUMP, ABSOLUTE CLEANLINESS
MUST BE MAINTANED TO ENSURE RELIABLE AND TROUBLE-FREE OPERATION OF YOUR EQUIPMENT.
13/26
MAY CHANGE WITHOUT PRIOR NOTICE
STREET WASHING EQUIPMENT KPL 270 - 200 - 1250x8
May 2012