21
Dynaset Oy | Menotie 3, 33470 Ylöjärvi | puh. 03 3488 200 | [email protected] | www.dynaset.com
HYDRAULIC VIBRAS
INSTALLATION
4. INSTALLATION
4.1. BEFORE INSTALLATION
ATTENTION!
Read these instructions before installation of the DYNASET product!
HYDRAULIC FLUIDS
To use proper hydraulic fluid, READ CHAPTER “6.2. Hydraulic fluids”.
4.2. INSTALLATION OF HVB UNIT
The HVB unit is to be installed into the base machine’s existing hydraulic tool line
or build hydraulic lines to it.
1. HVB unit is installed parallel to the working cylinder as close as possible.
2. Connect the (P) pressure line and the (T) return line to the HVBs corresponding
places.
3. Connect the HVB pressure outlets to the cylinders hydraulic lines. The maximum
length for hydraulic hoses from HVB to cylinder is 1,5m (60 in).
Picture 10: HVB installation
Содержание HVB 350/18-60
Страница 2: ......
Страница 53: ... DYNASET OY all rights reserved ...