23
Dynaset Oy | Menotie 3, 33470 Ylöjärvi | puh. 03 3488 200 | [email protected] | www.dynaset.com
HYDRAULIC MAGNETS
INSTALLATION
4.2. INSTALLATION TO A HYDRAULIC PRESSURE LINE
Additional hydraulic valves are needed when installing the HMAG PRO to a base
machine that does not have an existing hydraulic tool line. All the needed valves
for the installation can be purchased from DYNASET.
In the picture 11 is an example of installing the HMAG PRO into a open centre
hydraulic system.
Picture 11: Example of installing the HMAG PRO to a open centre hydraulic
system with needed valves.
1. DYNASET HMAG PRO
2. DYNASET Priority valve PV-SAE
2.1. DYNASET PC-SAE
pressure compensator
2.2. DYNASET LSV Load
Sensing valve
3. Open centre directional
control valves
4. Base machines fixed
displacement pump
5. Oil cooler
6. Oil filter
7. Oil tank
