English - 22 -
8.- SETTINGS MENU:
Many functions of the transceiver are selected or setting via menu, rather than thru keypad.
8.1.- MENU ACCESS:
1. The transceiver must be in standby mode.
2. Press and hold the [PTT/CLR] key for more than 3 seconds to select the operation band (CTRL).
3. Press the [MENU] knob to enter into menu options.
As shown below:
4. Rotate the [MENU] knob to select the desired function.
● Set.
● Radio.
● Scan.
5. After selecting, press the [MENU] knob to enter the current menu options.
● For information of the settings menu, refer to the following table.
6. Rotate the [MENU] knob to select the desired parameter or configuration.
7. After selecting, press the [MENU] knob to confirm the desired parameter or press the [B/E] key
to cancel and return to the previous option.
● Press and hold the [B/E] key for 3 seconds to exit the settings menu and return to the standby
mode.
8. Repeat the above 4 to 6 operation procedure to continue to set the other desired functions.
● In any menu operation, press and hold the [B/E] key for 3 seconds to exit the menu operation
mode.
● In settings menu options, press the [B/E] key to cancel the current setting and return to the
previous menu option.
