Dynascan L88, Руководство пользователя, Страница: 10 / 10

English - 10 -
Operating temperature range: -20 ºC to +40 ºC.
Power supply: 7.4 V Li-Ion battery pack.
Duty cycle: 100 %.
9.1.- CHANNELS AND FREQUENCIES TABLE:
Channel (CH) Frequency (MHz)
1 446.00625
2 446.01875
3 446.03125
4 446.04375
5 446.05625
6 446.06875
7 446.08125
8 446.09375
10.- TROUBLESHOOTING:
If you have problems with the operation of your transceiver, follow the instructions in the following
table.
Problem Cause/Possible solution
The transceiver does not
turn on when operating the
[ON/OFF/Vol] knob. - The battery pack is discharged. Charge the battery pack.
- The battery pack life is finished. Replace the battery pack for a
new one of the same characteristics as that supplied with this
transceiver.
- The battery pack was not installed correctly. Remove and install
again.
Battery power dies shortly
after charging. - The battery life is finished. Replace the battery pack for a new one
of the same characteristics as that supplied with this transceiver.
Cannot communicate with
other members in your
group. - Make sure that you use the same channel and the same tone or
code as the other members of your user group.
- It is very far from the other members of its user group. Make sure
you are within the coverage range of other users.
Other communications are
listened on the channel. - Change the “CTCSS” tone or “DCS” code of all transceivers in
your users group.
Once carried out these previous checking’s, if it continues having problems with the
transceiver, consult with the Authorized Technical Service.