DI100ST2-M User Manual
12
Input / Output Terminals
A.
AC (IN):
Connect the supplied power cord to the wall outlet.
B.
Power Switch:
Press to switch the main power on/off.
C.
RJ-45 1 (IN):
RJ45 network input connection.
D.
RJ-45 2 (IN):
RJ45 network input connection.
E.
RS-232 (IN):
RS232C network input connection for remote control from PC.
F.
HDMI 1 (IN):
Connect the HDMI output of a PC or an AV device via a HDMI cable.
G.
HDMI 2 (IN):
Connect the HDMI output of a PC or an AV device via a HDMI cable.
H.
DP (IN):
Connect the DP output of a PC or an AV device via a DP cable.
I.
USB 3.0 port:
Support for USB flash drive storage, mouse and keyboard.
J.
Extension Connector:
Extension Connector for optional IR Extension sensor kit (ESK302).
K.
Micro SD card:
Support for up to 128GB, FAT32 format is supported.
L.
Thermal:
Extension Connector for optional Extension thermal kit (ETK203).
M.
Audio (OUT):
Connect the audio signal output from Audio IN jack to an external AV device.
N.
SDM Slot:
Install SDM, please refer to
P.27
*USB 3.0 port: A standardized port to connect a variety of devices like mouse, keyboard, and flash
drive. Support USB storage devices formatted with NTFS, FAT32 (32G) file system.
A
C
B
E
F
D
I
J
L
K
M
G
H
N
