Dynascan DB-93M Скачать руководство пользователя страница 20

 

 

 

English - 20 - 

5.- Press the [ENTER] to confirm. 
You can use keypad or software to input or program a non-standard “CTCSS/DCS”. 
 

11.19.- SELECT “CTCSS” AND “DCS” ON TRANSMITTING: 

 
1.- Press the [MENU] key. 
2.- Turn the selector knob until “T-CDC” (menu 019) is displayed. 
3.- Press the [ENTER] key. 
4.-  Rotate  the  selector  knob  and  select  the  desired  “CTCSS”  tone,  or  press  the  [*LOCK]  key  to 
select “DCS” code. While selecting the “DCS” codes, if you press the [#T-R] key, you will select 
the normal (N) or inverted (I) “DCS” codes. 
5.- Press the [ENTER] to confirm. 
You can use keypad or software to input or program a non-standard “CTCSS/DCS”. 
 

11.20.- SELECT THE FREQUENCY STEP: 

 
1.- Press the [MENU] key. 
2.- Turn the selector knob until “STEP” (menu 020) is displayed. 
3.- Press the [ENTER] key. 
4.- Rotate the selector knob to select desired frequency step. You can choose amongst: 2.5K, 5K, 
10K, 6.25K, 12.5K, 25K, 50K and 100K. 
5.- Press the [ENTER] key to confirm. 
6.- Press the [VFO/MR] key to exit. 
 

11.21.- “CTCSS” SCAN: 

 
1- Press the [MENU] key. 
2.- Rotate the selector knob until “CTC.S” (menu 021) is displayed. 
3.- Press the [ENTER] key. 
When the transceiver scan match “CTCSS” tone, open the squelch and exit scanning. 
 

11.22.- “DCS” SCAN: 

 
1- Press the [MENU] key. 
2.- Rotate the selector knob until “DCS.S” (menu 022) is displayed. 
3.- Press the [ENTER] key. 
When the transceiver scan match “DCS” code, open the squelch and exit scanning. 
 

11.23.- BACKLIGHT ON/OFF: 

 
To turn on the backlight: 
1.- Press the [MENU] key. 
2.- Turn the selector knob until “LED” (menu 023) is displayed. 
3.- Press the [ENTER] key. 
4.- Turn the selector knob to select “ON, OFF, AUTO”. 
5.- Press the [ENTER] key. 
6.- Press the [VFO/MR] key to exit. 
 

11.24.- END ROGER ALERT: 

 
1.- Press the [MENU] key. 
2.- Turn the selector knob until “ROGER” (menu 024) is displayed. 

Παύλος Μεϊµάρης

Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73 

URL: http://www.meimaris.com -

Εmail: info@meimaris.

com

Παύλος Μεϊµάρης

Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73 

URL: http://www.meimaris.com -

Εmail: info@meimaris.

com

Содержание DB-93M


























Отзывы: