Dynascan DB-93M Скачать руководство пользователя страница 13

 

 

 

English - 13 - 

 

 

8.13- SIDE KEYS: 

 

 

 

8.14.- “DTMF/MSK/5-TONE” OPERATION: 

 
Use  “DTMF/5-Tone”  to  achieve  selective  calling,  stun  and  disstun  functions.  Your  distibutor  or 
salesperson will program the “DTMF/5-Tone” and the “ID code”, thet it will allow TX stun , cancel 
TX stun, Rx/Tx stun, cancel Rx/Tx stun, etc. Defined side key as optional signaling call, and select 
the  “DTMF”  or  “5-Tone”  as  optional  signaling  on  the  channel,  press  the  defined  side  key  until 
display  shows  “CALL?”,  enter  the  “ID”  code  directly  or  input  the  number  stored  and  press  the 
[PTT] key to transmit 
If  you  make  a  mistake  or  want  to  cancel  calling,  rotate  the  selector  knobr  counter-clockwise  to 
delete it one by one. Rotate clockwise to exit. 

■ “5-Tone” encode/decode:

 

1) “5-Tone” call: Use side key for optional signaling “5-Tone” call, or press the [MENU] key, the 
display  shows  the  “5-T”,  then  input  the  selective  call/stun/disstun  code,  press  the  [PTT]  key  to 
make a call. 
2) “5-Tone” signaling encode: Up to 9 groups can be set by the distributor or salesperson. 

■ “DTMF” call:

 

Use “DTMF” to achieve selective calling, group calling and all calling function. 
“DTMF” selective call, group call, all call function is set by the distributor or salesperson.

 

■ “MSK” encode/decode:

 

“MSK” codec set by the distributor or salesperson, a total of 9 groups and you can enter: 0-9, A-F. 
Each group can be set to 4 digits. 
“MSK”  call:  Use  side  key  for  optional  signaling  “MSK”  call  or  press  the  [MENU]  key  until  the 
display shows “MSK In”, enter the “ID” code and press the [PTT] key to make a call. 
 

8.15.- “ANI” FUNCTION: 

 
There are three methods to transmit “ANI” code: 

1)

 Before transmitting, 

2)

 After transmitting, 

3) 

Before and after transmitting.

 

Three signaling to choose from: “MSK”, “DTMF”, “5-Tone”, select the type of signaling formats, 
decoding “ID” must also be same. 
Your  distributor  or  salesperson  will  program  the  above  information.  Use  shortcuts  [MENU]  + 

Side key programmed as follow: 
1) Optional signaling call. 
2) Alarm function. 
3) 1750 MHz signaling tone. 
4) Squelch. 

PTT:  Press  to  transmit,  release  to 
receive. 

Παύλος Μεϊµάρης

Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73 

URL: http://www.meimaris.com -

Εmail: info@meimaris.

com

Παύλος Μεϊµάρης

Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73 

URL: http://www.meimaris.com -

Εmail: info@meimaris.

com

Содержание DB-93M


























Отзывы: