Dynapac Hatz F80W, Руководство по ремонту

Страница: 220 / 246

216 F80W
D451C029
STD
STD
1
0
1.7.7 Propel pump calib
1.7.8 Set value
D451C026
STD
STD
1
0
1.7.7 Propel pump calib
1.7.8 Set value
1.7 Calibration drive
1.7.1 Propel pump max rev
1.7.2 Propel pump min rev
1.7.3 Propel pump stop
1.7.4 Propel pump min fwd
1.7.5 Propel pump max fwd
200
2100
2200
2200
2300
2300
2300
2800
600
2400
2400
2400
900 1200 1500
2500
2500
2500
3000 3300 3600
2600
2600
2600
1800
3900
2700
2700
2700
2200
4200
2800
2800
2900
4500 4800
STD
STD
STD
STD
STD
mV
mV
mV
mV
mV
1,954
2,655
2,664
2,669
3,389
451C034
15 Wiring
Confirm the setting by checking and subsequent unchecking
the box in “1.7.8 Set value”.
A short sound signal is heard.
After finishing calibration uncheck the last box in “1.7.7 Propel
pump calib”.
The changed values are visible at the next connection of the
computer to the machine.
Check the parameters; the values must be slowly increasing.
Note
The result of calibration should be that when the working speed
is started, it slowly decreases without any speed increase by the
travel controller or by turning the paving speed selector. The
machine must not move if the travel controller is in the maxi-
mum position for the forward travel and at the same time the
paving speed selector is in the “min” position.