Dynapac F1800W, Руководство по эксплуатации и техническому обслуживанию

Страница: 200 / 348

D 42.18 8
External starting (starting aid)
A
The engine can be started with the help of an external power source if the batteries
are empty and the starter no longer turns.
Suitable power sources are:
- Other vehicles with a 24V system
- Additional 24V battery
- Start device that is suitable for external starting (24 V/90 A).
m Standard chargers or quick chargers cannot be used for external starting.
To externally start the engine:
m The starting aid cable must be connect-
ed to 24 V.
- First connect the positive terminal (A)
of the starting aid battery to the posi-
tive terminal (B) of the vehicle battery.
- Then connect the negative ter-
minal (C) of the starting aid battery to
the ground of the discharged vehicle,
e.g. to the engine block or to a bolt (D)
on the vehicle frame.
f Do not connect the starting aid cable to
the negative terminal of the discharged
battery! Danger of explosion!
m Lay the starting aid cable so that it can
be disconnected once the engine is running.
Set the drive lever (1) to the centre position and the speed adjuster (2) to minimum.
A
Starting the engine is only possible if no "AUTO" or "MANUAL" function is switched on!
- Insert the ignition key (3) in position "0".
m The lights should be switched off during starting to reduce the current drain
on the battery.
- If necessary, start the engine of the vehicle supplying power and leave to run
for a while.
B
A
C
D