Dynapac F1000T, Руководство по эксплуатации и техническому обслуживанию

Страница: 122 / 238

D 3.0 2
D_3.0_
01_U
S.fm 2
-
8
Driver's seat
To avoid injury, the individual seat settings should be checked and adjusted before
starting the vehicle.
After the adjustments are set, check the
seat to ensure it does not move out of
adjustment.
- Seat forward and back adjustment
(1): The seat can be moved forward or
it can be moved back. to adjust the
seat, raise the lever on the lower left
side of the seat to release the lock.
Once the seat is in the desired posi-
tion, release the lever and the seat will
lock into place
- Seat back rest adjustment (2): The
back rest can be adjusted to lean for-
ward or lean back. To adjust the back rest, turn the knob on the lower front part of
the seat. Turn the knob clockwise to lean the back rest forward; turn the knob coun-
ter-clockwise to lean the back rest back.
- Armrest positions (3): The armrest can be lowered to support the arm or it can be
raised to be stowed out of the way.
Batteries
The batteries are located under the right
hand side (from operator platform) main-
tenance door.
There are two 12 V batteries to produce
the 24 V needed for the electrical sys-
tem.
For servicing, see chapter F.
Follow the instructions when jump starting the paver. (see section D 4).
1
3
2
Batteries