Dynapac DR6X Скачать руководство пользователя страница 73

Страница: 73 / 114

8.7 Monthly

8.7.1 Checking the tamper foot

NOTICE!
Components may get damaged!

–

Use only oil of the permitted specification

Chapter 8.3 „List of fuels and lubri-

cants“ on page 67

Protective equipment:

Working clothes

Protective gloves

Park the machine in secured condition

Chapter 6.4

„Parking the machine in secured condition“ on page 55

Park the machine so that the tamper foot is in horizontal posi-

tion.

Allow the machine to cool down.

Clean the sight glass.

Check the oil level.

The oil must be visible between the middle and the upper

edge of the oil level inspection glass, if necessary top up oil

up to the bottom edge of the filling opening.

The upper edge of the inspection glass

equals the bottom edge of the oil filling bore.

Check concertina wall for condition, damage and tight fit.

Check the hose clamps for tight fit, tightening torque for

screws (1): 10 Nm (7.4 ft

lbf).

Fig. 54

Fig. 55

Maintenance – Monthly

DR6X

Содержание DR6X



















































































































Результаты поиска

Содержание DR6X

Отзывы:

Dynapac DR6X, Руководство по эксплуатации, Страница: 73 / 114

Результаты поиска

Содержание DR6X

Отзывы: