Dynapac CC 622, Руководство по обслуживанию

Страница: 5 / 39

3 CC 622/622HF M622EN3
LUBRICANTS AND SYMBOLS
ENGINE OIL
ambient temperature Shell Rimula SAE 15W/40 or equivalent.
-10°C-+40°C (14°F-104°F) API CF-4/SG (CD/CE)
HYDRAULIC FLUID
ambient temperature
-10°C to +40°C (14°F-104°F) Shell Tellus TX68 or equivalent
above +40°C (above 104°F) Shell Tellus TX100 or equivalent
BIOLOGICAL Shell Naturelle HF-E46
HYDRAULIC FLUID When it leaves the factory, the machine may be filled
with biologically degradable fluid. The same type of
fluid must be used when changing or topping off.
DRUM OIL
ambient temperature
-15°C to +40°C (5°F-104°F) Mobil SHC 629 or equivalent
TRANSMISSION OIL
ambient air temperature Shell Spirax SAE 80W/90, HD API, GL-5
-15°C – +40°C (5°F - 104°F)
GREASE SKF LGHB2 (NLGI Class 2) or equivalent for the
articulated joint.
Shell Retinax LX2 or equivalent for other grease points.
FUEL See engine manual.
COOLANT GlycoShell or corresponding.
mixed 50/50 with water Anti-freeze protection down to about -41°C (-106°F).
Other fuel and lubricants are required for operation in extremely high or extremely low
ambient temperature. See the “Special instructions” chapter, or consult Dynapac.
Always use high-quality lubricants in the recommended amounts. Too much grease or oil can
cause overheating and subsequent increased wear.
Engine, oil level Air filter
Engine, oil filter Battery
Hydraulic reservoir, level Sprinkler
Hydraulic fluid filter Sprinkler water
Drum, oil level Recycling
Lubricating oil Fuel filter
Air pressure Sprinkler, tyres
Coolant, level Transmission, oil level