Dynapac CA500 Series, Операция

Страница: 24 / 28

22 CA500 O500EN1
INSTRUCTIONS FOR LIFTING
Fig. 25 Articulation in open mode
1. Locking arm
2. Locking cotter
3. Locking stud
4. Locking lug
Locking the articulated joint
Weight: See lifting plate on the roller.
Lifting the roller
Releasing the articulated joint
Articulation must be locked to prevent in-
advertent turning before lifting the roller.
Turn the steering wheel so that the machine is set
to drive straight forward. Push in the reserve/parking
brake knob.
Pull out the lowermost locking cotter (2) fitted with a
wire, pull up locking stud (3) fitted with a wire.
Fold out the locking arm (1) and secure it to the upper
locking lug (4) on rear machine frame.
Fit the locking stud (3) in the holes through the locking
arm (1) and locking lug (4) and secure the stud in posi-
tion with the locking cotter (2).
Fig. 24 Roller prepared for lifting
1. Lifting plate
Fig. 23 Articulation in interlocked mode
1. Locking arm
2. Locking cotter
3. Locking stud
4. Locking lug
Remember to restore the articulation interlock
to its open mode before driving again.
Fold back the locking arm (1) and secure it in the lock-
ing lug (4) with the locking stud (3). Insert the lower-
most locking cotter (2) fitted with a wire, to secure the
locking stud (3). The locking lug (4) is located on the
tractor frame.
1
1
1
1
3 2
4
4 3 2
The gross weight of the machine is noted
on the lifting plate (1). See also technical
specifications in the maintenance instruc-
tions.
Lifting gear, such as chains, steel wires,
straps, and lifting hooks must be dimensioned
in conformance with current regulations.
Keep well clear of the lifted machine! Make
sure that lifting hooks are securely ancho-