manualshive.com logo in svg

Dynapac CA 302, Инструкция по эксплуатации

Инструкция по эксплуатации для компактора Dynapac CA 302 доступна для бесплатного скачивания на нашем сайте. Получите полное руководство по использованию этого качественного оборудования прямо сейчас, чтобы работать с ним эффективно и безопасно. Посетите manualshive.com и загрузите руководство уже сегодня!

Поделиться
Скачать
background image

Machine description

ICA302-4EN4.pdf

2012-04-12

Function descriptions

No

Designation

Symbol

Function

No

Designation

Symbol

Function

1

Starter switch

The electric circuit is broken.

1

Starter switch

The electric circuit is broken.

All instruments and electric controls are supplied with
power.

All instruments and electric controls are supplied with
power.

Starter motor activation.

Starter motor activation.

2

Engine revs/Frequency selector
(Optional)

The current rpm is shown in this position

2

Engine revs/Frequency selector
(Optional)

The current rpm is shown in this position

The vibration frequency is shown in this position (Left
position has no function.

The vibration frequency is shown in this position (Left
position has no function.

3

Rear working lights switch
(Optional).

Turn right to switch on the working lights.

3

Rear working lights switch
(Optional).

Turn right to switch on the working lights.

4

Hazard beacon, switch
(Optional).

Turn right to switch on the hazard beacon.

4

Hazard beacon, switch
(Optional).

Turn right to switch on the hazard beacon.

5

Direction indicator, switch
(Optional).

Turn to the left to switch on the left direction indicators
etc.
The direction indicators are off in the middle position.

5

Direction indicator, switch
(Optional).

Turn to the left to switch on the left direction indicators
etc.
The direction indicators are off in the middle position.

6

Hazard flashers, switch
(Optional).

Turn to the right to switch on the hazard flashers.

6

Hazard flashers, switch
(Optional).

Turn to the right to switch on the hazard flashers.

7

Main/dipped beam, switch with
control lamp (Optional).

In the right position, the switch lights and the main
beam is on.
In the left position, the dipped beam is on.

7

Main/dipped beam, switch with
control lamp (Optional).

In the right position, the switch lights and the main
beam is on.
In the left position, the dipped beam is on.

8

Driving lighting, switch
(Optional).

Lights off.

8

Driving lighting, switch
(Optional).

Lights off.

Parking lights on.

Parking lights on.

Front working lights on.

Front working lights on.

9

Warning lamp, malfunctioning
anti-spin function (Optional)

The hydraulic propulsion system is not working
satisfactorily if the lamp flashes. Locate and remedy
the fault.

9

Warning lamp, malfunctioning
anti-spin function (Optional)

The hydraulic propulsion system is not working
satisfactorily if the lamp flashes. Locate and remedy
the fault.

10

Voltmeter (Optional).

Shows electrical system voltage.
Normal range is 12-15 volts.

10

Voltmeter (Optional).

Shows electrical system voltage.
Normal range is 12-15 volts.

11

Temperature gauge, hydraulic
fluid (Optional).

Shows hydraulic fluid temperature.
Normal temperature range is 65°-80°C (149°-176°F).
Stop the engine if the gauge shows a temperature of
more than 85°C (185°F). Locate the fault.

11

Temperature gauge, hydraulic
fluid (Optional).

Shows hydraulic fluid temperature.
Normal temperature range is 65°-80°C (149°-176°F).
Stop the engine if the gauge shows a temperature of
more than 85°C (185°F). Locate the fault.

12

Temperature gauge, water
(Optional).

Shows the water temperature.
Normal temperature is around 90°C (194°F).
Stop the engine if the gauge shows a temperature of
more than 103°C (217°F). Locate the fault.

12

Temperature gauge, water
(Optional).

Shows the water temperature.
Normal temperature is around 90°C (194°F).
Stop the engine if the gauge shows a temperature of
more than 103°C (217°F). Locate the fault.

13

Engine revs/Frequency meter
(Optional).

The inner scale indicates the current engine speed.
The outer scale shows the vibration frequency.

13

Engine revs/Frequency meter
(Optional).

The inner scale indicates the current engine speed.
The outer scale shows the vibration frequency.

14

Compaction meter (Optional)

See separate instructions

14

Compaction meter (Optional)

See separate instructions

31

Содержание CA 302


























































































































Отзывы:

Нет отзывов

Похожие инструкции для CA 302

ABB ACS880-01 Series Installation Manual preview
ACS880-01 Series
Бренд: ABB Страницы: 238
Landoll 2210 Operator'S Manual preview
2210
Бренд: Landoll Страницы: 52
JBSYSTEMS Light Premium Operation Manual preview
Premium
Бренд: JBSYSTEMS Light Страницы: 14
iGuzzini B183 Instruction Sheet preview
B183
Бренд: iGuzzini Страницы: 20
Daga AB Directions For Use Manual preview
AB
Бренд: Daga Страницы: 24
DAF DAVIE XDc II Quick Start Manual preview
DAVIE XDc II
Бренд: DAF Страницы: 68
QRS PMII Upgrade Instructions preview
PMII
Бренд: QRS Страницы: 16
QMAXZ Lighting QS Series User Manual preview
QS Series
Бренд: QMAXZ Lighting Страницы: 36
XFit TARGET User Manual preview
TARGET
Бренд: XFit Страницы: 16
Nakamichi BlackBox Series Service Manual preview
BlackBox Series
Бренд: Nakamichi Страницы: 23
Harken 3387 Instructions preview
3387
Бренд: Harken Страницы: 4
Dantel 44210 Installation & Operation Manual preview
44210
Бренд: Dantel Страницы: 22
Kelso KCM65 Product Manual preview
KCM65
Бренд: Kelso Страницы: 21
Cameo CLSTORM User Manual preview
CLSTORM
Бренд: Cameo Страницы: 136
Vision & Control TO44/11.0-110-V-B Instructions For Use Manual preview
TO44/11.0-110-V-B
Бренд: Vision & Control Страницы: 60
nCounters Essential Load Unit Operation Manual preview
Essential Load Unit
Бренд: nCounters Страницы: 8
Vaisala PTB330TS User Manual preview
PTB330TS
Бренд: Vaisala Страницы: 89
M+W Dental select SUPERLITE POWER PEN Instructions For Use Manual preview
select SUPERLITE POWER PEN
Бренд: M+W Dental Страницы: 58

Бренды по названию

Популярные бренды

Загрузить еще бренды