Dynapac CA 252, Руководство по обслуживанию

Страница: 26 / 40

24 CA 252/302/402 M252EN6
EVERY 500 HOURS OF OPERATION (Every three months)
Fig. 38 Engine hood
1. Hinge
Controls and moving
joints – Lubrication
1
Lubricate engine hood hinges (1) and the slide rails of
the operator’s seat with grease, other joints and
controls with oil. Lubricate the cab hinges with grease.
See lubricant specification.
Fig. 37 Diesel Engine
1. Fuel pre-filter
Fuel pre-filter – Cleaning
Fig. 36 Left side of engine
1. Drain plug
2. Oil filter
Diesel engine
– Changing the filter and oil
Position the roller on a level surface. Stop
the engine and apply the parking brake/
reserve brake.
The oil drain plug (1) is most easily accessible from
underneath the engine. Drain the oil when the engine is
warm. Place a receptacle for at least 15 litres (16 qts)
underneath the drain plug.
Observe caution when draining hot oil.
Protect your hands.
Change the engine oil filter (2) at the same time.
See also the engine manual.
Dispose of the drained oil and filter in an
approved manner.
1 2
1
See engine instruction manual, cleaning the filter, in the
fuel system chapter.
Make sure there is adequate ventilation
(extraction) if the diesel engine is run in-
doors. Risk of carbon monoxide poisoning.