DynAmp RCEM, Инструкция по установке, эксплуатации и обслуживанию

Страница: 59 / 78

Installation, Operation and Service Manual RCEM
© 2012 DynAmp, LLC Page 45
43756 G
APPENDIX B:
SOFTWARE
B.1 PROVIDED SOFTWARE
All software and drivers associated with this product are supplied on CD-ROMs. The
contents of the DynAmp CD-ROM are as follows:
•
DynAmp spreadsheet(s)
•
Personal Daq/56 configuration file: “RCEM.cfg”
•
A copy of this manual “043526x.pdf” (x = manual revision)
•
Applicable manuals addendums
The Personal Daq/56 software is supplied on the manufacturer’s CD-ROM.
The above software is already installed on the laptop computer supplied with the product.
However, in case of a problem, please follow the instructions below for reinstalling the
software.
B.2 MINIMUM REQUIREMENTS FOR LAPTOP COMPUTER
The following is a list of the minimum requirements for the laptop computer:
1.
Windows 2000 operating system. Software is compatible with Vista (32 bit) and
Windows 7 (32 bit).
2. Microsoft Office Small Business
3. USB High-power Compliant Port
4. USB Mass Storage Device
5. CD-ROM Drive
6. Universal AC Adapter with an IEC 60320 International Standardized Appliance
Connector
Note: All power saving modes of operation must be disabled.
B.3 SOFTWARE INSTALLATION
Place Personal Daq/56 CD-ROM in the drive and using “Windows Explorer”, double click
on “Setup.exe” in the “PdaqView\Disk1” subdirectory. This will start the iotech installation
program. Continue with the installation by accepting all the default values.
The iotech drivers are typically installed in a directory called “Program Files\pDaqView”.
The drivers require an authorization number for proper operation. Use the following steps
to enter the authorization number: