Installation, Operation and Service Manual
LKP Series
© 2016 DynAmp, LLC
Page vii
041738 I
Hazard Warning!
Symbol Identification:
General definitions of safety symbols used on equipment and manual.
Caution/Warning: Refer to accompanying documents for instructions.
The CE mark proves the compliance of the equipment with the requirements of the
directives.
All installation, maintenance and service must be performed by qualified
technicians who are familiar with the warnings and instructions of this manual.
The enclosure doors must remain closed at all times during operation to
ensure safety of personnel. A set of keys is provided for locking the doors.
Only authorized personnel or technicians should be allowed to open and
service the unit.
Disconnect power to the system before servicing or replacing fuses.
DynAmp does not assume liability for the customer’s failure to comply with the
rules and requirements provided in this manual.
Use of the equipment in a manner not specified by the manufacturer can
impair the protection provided within.
GENERAL
This equipment is designed to be connected to hazardous electric voltages.
Ignoring the installation precautions and warnings can result in severe personal
injury or equipment damage.
To avoid the risk of electrical shock or fire, the safety instructions and
guidelines in this manual must be followed. The electrical specifications must
not be exceeded and the unit must be installed according to directions
provided.
HAZARDOUS
VOLTAGE
This equipment is intended for indoor use only. It should be mounted in a well-
ventilated area, away from high heat, dust, and corrosive atmosphere. The
ambient temperature must not exceed 55
°
C.
For mounting considerations that fall outside the recommended specifications
provided in this manual, the factory should be contacted for approval.
This unit is rated for installation category III and pollution degree 2.
INSTALLATION
