Dynamix DW-01Plus/H Gateway User Manual
- 75 -
Parameter Usages:
-
print:
Print current IP setting and status
-
mode:
Specify WAN IP mode (0=Static, 1=DHCP, 2=PPPoE), DHCP mode:
Dynamic Host Configuration, PPPoE mode: PPPoE Dial-up function.
-
ip:
Assigned IP address for Gateway
-
mask:
Assigned internet subnet mask
-
gate:
Assigned IP default gateway
-
autodns:
Specify the way to obtain DNS Server (0=Manual, 1=Auto), this
function is only usable in DHCP or PPPoE mode.
-
dns:
Setup DNS Server IP Address.
-
http:
Assigned Gateway web browser connection port number, default port
number 80.
-
dhcpsv:
Using this command to let Dynamix DW-01Plus/H as a DHCP server
for LAN port.
-
nat:
Enable or Disable NAT function
-
lanip:
Specify LAN port IP address (For NAT function), use this command setup
LAN IP address assigned to PC or other machine.
usr/config$ ifaddr -lanip 192.168.XXX.YYY
(The range of LAN IP is XXX: 1-254, YYY: 1-254)
-
sntp:
Simple Network Time Protocol (0=No update, 1=Specify server IP,
2=broadcast mode). When SNTP function is activated, users have to specify a
SNTP server as network time source. An example is demonstrated below:
usr/config$ ifaddr -sntp 1 10.1.1.1
Note:
The 10.1.1.1 stands for SNTP server
’
s IP address.
-
timezone:
set local time zone according to GMT
-
ipsharing:
To specify a global fixed IP address, user can add this IP address in
the command.
usr/config$ ifaddr -ipsharing 1 210.11.22.33
Note:
If the IP address is not a fixed one, the dedicated IP address is not necessary
in the command. However, dynamic IP Address is not working in Peer-to-Peer
mode.
-
ipchange:
If the unit is behind the IP sharing device and the IP address for the
WAN port of that IP sharing is using the dynamic IP address. This function has
to be enabled.
-
usr/config$ ifaddr -ipchange 1
-
id:
This id is for the user name of the PPPoE usage.
All manuals and user guides at all-guides.com