Dynamica HALO DNAmaster Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 44

Dynamica HALO DNAmaster Скачать руководство пользователя страница 7

SAFETY

-1

SAFETY SUMMARY

For your safety please read the following precautions carefully before

using the DNAmaster Spectrophotometer.

General Safety Guidelines

For safe handling of this product, please follow the instruction procedure in
the manual for this product.

Pay special attention to follow all the hazard warnings on the product and in
the manual. Failure to do so can cause injury to you or damage to the
product.

After installation, please do not move the equipment. A vibration might
affect the adjustment of the product.

The hazard warnings, which appear on the warning labels on the product or in
the manual, have one of the following alert headings consisting of an alert
symbol and a signal word, DANGER, WARNING, or CAUTION.

DANGER: Indicates an imminently hazardous situation that, if

not avoided, will result in death or serious injury. (It
does not apply to this equipment.)

WARNING: Indicates a potentially hazardous situation that, if not

avoided, can result in death or series injury.

CAUTION

:

Indicates a hazardous situation that, if not avoided,
will or can result in minor to moderate injury, or
serious damage to the product.

:

The alert symbol shown precedes every signal word

for hazard warnings, and appears in safety related
descriptions in the manual.

«
...
5
6
7
8
9
...
»

Содержание HALO DNAmaster













































Отзывы:

Нет отзывов