Step /
Étape
#
2
Flip Back
/ Rebattable
The head pad can now be flipped back, away
from the user.
Note: Reverse the process to return the head support pad to
it’s original position. Tighten the locking handle to prevent
any movement. The locking handle can be repositioned on
the screw once it I tightened by pulling out and turning.
Le coussin de tête peut maintenant être
retourné, loin de l’utilisateur.
Remarque : Inversez le processus pour ramener le coussin
de soutien de tête à sa position d’origine. Serrez la poignée
de verrouillage pour empêcher tout mouvement. La poignée
de verrouillage peut être repositionnée sur la vis une fois
qu’elle est serrée en tirant et tournant.
Last reinstall the head support arm over the flip back
post extension, securing in place with the hardware
that was set aside earlier in this step.
Note: The additional Latch Clamp Assembly that is provided
can be installed here instead of the original hardware if easier
readjustment is desired.
Flip Back Operation
Step 1 – Loosen Latch Clamp
To loosen, turn the latch clamp between ½ - 1 full turn
maximum.
Raise the post extension as far as possible.
Note: Once the post extension has been raised, hold onto the
support arm and head pad to prevent it from falling forward.
Step 2 - Loosen Latch Clamp
The head pad can now be flipped back, away from
the user.
Note: Reverse the process to return the head support pad
to it’s original position. Tighten the latch clamp to prevent
any movement. The latch clamp can be repositioned on
the screw once it I tightened by pulling out and turning.
(Figure 7)
FLIP BACK OPERATION
FONCTIONNEMENT DE L’OPTION RABATTABLE
Step /
Étape
#
1
Loosen Locking Handle
/ Desserrer la poignée de verrouillage
To loosen, turn the latch clamp between
½ - 1 full turn
maximum. Raise the post extension
as far as possible.
Note: Once the post extension has been raised, hold onto the
support arm and head pad to prevent it from falling forward.
Desserrer la poignée de verrouillage
Pour desserrer, tournez la pince de verrouillage
entre ½ et 1 tour
maximum. Soulevez l’extension
de poste aussi loin que possible.
Remarque : Une fois l’extension du poste levée, tenez le bras de
support et le coussin de tête pour l’empêcher de tomber.
Last reinstall the head support arm over the flip back
post extension, securing in place with the hardware
that was set aside earlier in this step.
Note: The additional Latch Clamp Assembly that is provided
can be installed here instead of the original hardware if easier
readjustment is desired.
Flip Back Operation
Step 1 – Loosen Latch Clamp
To loosen, turn the latch clamp between ½ - 1 full turn
maximum.
Raise the post extension as far as possible.
Note: Once the post extension has been raised, hold onto the
support arm and head pad to prevent it from falling forward.
Step 2 - Loosen Latch Clamp
The head pad can now be flipped back, away from
the user.
Note: Reverse the process to return the head support pad
to it’s original position. Tighten the latch clamp to prevent
any movement. The latch clamp can be repositioned on
the screw once it I tightened by pulling out and turning.
(Figure 7)
6
