Dynamic Saunas DYN-6108-01, Руководство пользователя

Страница: 26 / 35

certified electrician. If the power cord is damaged, please contact Customer
Support.
16. Do not use the sauna during an electrical storm to avoid risk of shock or injury.
17. Do not continuously switch the power ON and OFF excessively as it will
compromise the life of the electrical components.
18. Your hands must be dry and free of moisture before plugging and unplugging cords
and wiring harnesses from the power supply and circuit boards. Never operate the
sauna with wet hands or wet feet to avoid the risk of electrical shock or injury.
Never touch the metal prongs of the plug.
19. Do not attempt to make any repairs yourself unless authorized by the manufacturer
or its agent. If a problem occurs with the sauna, please contact the manufacturer or
its agent immediately to avoid safety risks. Unauthorized repair attempts will void
the manufacturer’s warranty.
20. Please make sure the outlet power supply meets the specifications required.
Failure to meet the requirements may cause safety risks.
21. Some sauna models are equipped with reading and/or roof lamps. Because the
lamp temperature will become very hot once powered ON, do not attempt to touch
the lamp to avoid being burned. Do not attempt to touch it for at least 20 minutes or
until it cools down completely if a need to touch it arises.
22. Do not pour water or any other liquids onto the infrared heat emitters. Do not bump,
hit, or break the heating elements as it may cause an electrical short and pose a
safety risk.
23. Do not make any modifications to the sauna, the sauna structure, or the sauna
components.
24. Prior to each sauna session, the sauna room is to be inspected for correct
operation. If for any reason your sauna does not seem to be operating properly,
discontinue use and contact Customer Service.
Safeguards For Your Sauna
1. Do not install the sauna near water, near a bathtub (if water will splash on the
sauna), near a shower (if water will splash on the sauna), in a wet basement, or
near a swimming pool (if water will splash on the sauna).
2. Do not use liquid cleaners or aerosol cleaners on the sauna. Unplug the sauna
from the wall outlet before cleaning. Use plain water and a soft damp cloth for
cleaning.
3. The power supply cord should be routed so that it is not walked on or pinched by
any object that may be placed against it.
4. When replacement parts are required, be sure they meet the specified
requirements of the manufacturer. Unauthorized substitutes may result in a fire,
electrical shock, or other hazardous situations. After any repairs, please ask the
service technician to perform a safety check to determine that the sauna is in good
working order.
Page 25