The illustrations may differ in some details from the original. Subject to change without prior notice.
Copyright
©
2016,2017 by Dynamic Projection Institute GmbH. All Rights Reserved. http://www.dynamicprojection.com - MDC_QSG - Version 1.0.8- Page 20
Copyright
©
2016,2017 by Dynamic Projection Institute GmbH. All Rights Reserved. http://www.dynamicprojection.com - MDC_QSG - Version 1.0.8 - Page PB
commands are:
•
KILL_MDC : Terminates the current running MDC project.
•
LOAD $path_to_mdc_project_or_playlist : Load and start project/playlist
•
AULOAD $path_to_mdc_automatic : Load and start automatic file
•
KILL_AUTO : Kill all automatic jobs
•
LAMP_ON $MIRROR_ID : Projector lamp on
•
LAMP_OFF $MIRROR_ID : Projector lamp off
•
MOTOR_OFF $MIRROR_ID : Mirror Head Motor&LED off
•
MOTOR_ON $MIRROR_ID : Mirror Head Motor&LED off
•
RESET $MIRROR_ID : Mirror Head Reset
•
SCREENSETUP : Request restart of screen detection (== CRTL+ALT+SHIFT+S)
•
MDC_REBOOT : Request MDC reboot (== CRTL+ALT+SHIFT+R)
•
MDC_HALT : Request HALT of MDC
•
SYSTEM_SHUTDOWN $MIRROR_ID : Combination of KI LA MOTOR_OFF
•
SYSTEM_START $MIRROR_ID : Combination of KI L MOTOR_ON
•
MODE_MANUAL : Enable manual control
•
MODE_AUTOMATIC : Disable manual control
•
DLOAD : Load default project - can be set in the SETUP page of MDC-Touch
•
DAULOAD : Load default automatic - can be set in the SETUP page of MDC-Touch
•
SIMPLESTART: This is equal to the TURN ON button on MDC-Touch
•
SIMPLEKILL: This is equal to the TURN OFF button on MDC-Touch
Examples:
•
/opt/mdcos/bin/mdc-sender SYSTEM_START 0
Start all attached Mirror Heads and turn on the lamps
•
/opt/mdcos/bin/mdc-sender LOAD /home/mdcuser/Dokumente/show1.mdc
Load project “show1” and start it
•
/opt/mdcos/bin/mdc-sender KILL_AUTO 0
Kill all automatic jobs
