Embedded Solutions
Page 5
Product Description
cPCIRepeat32 is part of the Dynamic Engineering cPCI and PMC compatible family of
modular I/O components.
The cPCIRepeat32 is a 6U 4HP design with one PMC position. The design is rated for
industrial temperature operation “ET” –40C
+85C.
The bridge isolates the cPCI PCI bus [J1] from the local PMC PCI bus. Connector J2
has a “Repeated” copy of the PCI bus to be used for bus expansion purposes. Please
note: J2 is not pinned out in the standard manner. Do not use in a backplane not
designed for cPCIRepeat32. The arbitration and clock references from the secondary
side of the bridge are also available on J2.
Easy to use as a plug and play device. In transparent mode no special software is
required for the carrier. A special hidden address range is available to allow high-speed
local bus operations without interfering with the cPCI bus.
Special features:
•
Universal cPCI 6U 4HP.
•
Extended temperature range [-40 +85C]
LED names within quotes
: LED’s for power rails are illuminated when corresponding
voltage is within tolerance.
•
LED on PMC Busmode “PMC-0”
•
LED on plus 12V “P12V”
•
LED on minus 12V “M12V”
•
LED on plus 5V “P5V”
•
LED on plus 3.3V “P3.3V”
•
Secondary VIO set to 3.3V
•
32 bit operation on both PCI buses
•
66 or 33 MHz operation. With 66 MHz. primary bus speed the secondary bus can be
66 or 33 MHz.
•
Front panel connector access through cPCI bracket
•
JTAG programming support option
•
GPIO bus option
cPCIRepeat32 is ready to use with the default settings. Just install the PMC onto the
cPCIRepeat32 and then into the system.
