Dynamic CCTV MX-SDI Series, Руководство пользователя

Страница: 11 / 38

10
Operating Instruction & User’s Guide
１
-
５
-
１
Basic Connection
By referring to above [Figure 2-1] and [Figure 2-2], Connect the CCTV camera, HDMi monitor (or VGA monitor),
and USB mouse to the DVR and set up CONFIG SWITCH.
Connecting Device DVR Terminal
1 CCTV camera Rear Panel Video Input
2 VGA Monitor / LCD Monitor Rear Panel VGA-OUT
3 Mouse MX-SDI series: on front panel
4 CONFIG SWITCH Rear Panel NTSC/PAL or VGA/TV Setup
Refer to the CONFIG SWITCH description as below.
1. The input video type must be either NTSC or PAL; these two types must not be used together.
2. Select the input video format (NTSC/PAL) using the CONFIG switch on the rear side of the product.
3. Select the input video resolution between 1080p and 720p. These two types must not be used together.
１
-
５
-
２ Connection of Other Devices
Connect the PTZ controller cable, audio in/output, network and sensors as below.
Connecting Device DVR Terminal
1 Mike / Speaker Rear Panel Audio Input / Audio Output
2 LAN Cable Rear Panel Ethernet
3 PTZ Camera Rear Panel Terminal Block
4 Sensor / Relay / TTL OUTPUT Rear Panel Terminal Block)
5 Key controller Rear Panel Terminal Block
1) Audio In/Output
Audio supports 4 inputs and 1 output.
2) Terminal Block
Terminal Block on the rear panel is for the connections of PTZ / Sensor / Relay.
[Figure 2-2. Terminal Block Description]