Intelimet Advantage 6
45
7.
In the
Datalogger clock
window is
displayed as shown in the figure. If
Datalogger Date/Time is different
from the PC Date/Time, select time
zone offset between data logger and
PC and click
Set Datalogger Clock
command button. Click
Next
to
continue.
8.
In the
Send Program
window click
command button
Select and Send
Program
to select *.cr2 program
(IMET_MP2_Main.CR2)
using
windows file selector and send to the
data logger. Alternatively, you many
click on command button
Select and
associate program
for sending to data
logger at a later time.
9.
Click Next to complete the wizard and
then Finish to close the Ezsetup wizard
and revert back to PC200 main
window as shown below. Choose stay
connected to keep the communication
and close the Ezsetup wizard. Notice that a new station “Imet” is added in the station list, along
with the station parameters entered while in the setup wizard.
10.
In the PC200
Setup/Connect Tab
notice “Disconnect button is displayed” as shown in the figure
below and on the bottom right corner
displays Connection time, implying
software is currently connected to
the data logger. Also data logger
clock and data logger program can
be set from this window.
11.
Connecting to a data logger already
setup in the software is described in
the next section.
Содержание InteliMet Advantage 6
Страница 1: ...InteliMet Advantage 6 Weather Station User Manual v 1 1 ...
Страница 16: ...Intelimet Advantage 6 15 ...
Страница 32: ...Intelimet Advantage 6 31 ...
Страница 58: ...Intelimet Advantage 6 57 Appendix C DATA SHEETS ...