Dynamax InteliMet Advantage 6 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 62

Dynamax InteliMet Advantage 6 Скачать руководство пользователя страница 30

Intelimet Advantage 6

29

3.3.2 Solar Radiation (PYR-P)

PYR-P solar radiation sensor is supplied with Leveling plate LEV and mounting fixture(CM225).
The base includes a bubble lever, sensor holding screw and three adjustment screws for level
setting.

o

The LEV leveling plate is set on top of the mounting fixture (CM225) and the mounting
fixture is attached to cross arm as shown below using u-bolt and nuts.



Position the base of the sensor in the leveling plate and tighten the mounting screw from
the bottom. Mount the leveling plate on the mounting plate stand, and loosely attach using
the three inner screws through the top holes with about 4 turns each. Now, adjust the three
Allen (hex socket) leveling screws such that the bubble is in the center showing the sensor
and leveling plate are horizontal. Tighten the three inner set screws to fix the position.
Remove the red protective cap when ready to use.



The PYR-P sensor comes pre-wired to the data logger. Simply route the cable from data
logger to the sensor and secure with tie straps.

«
...
28
29
30
31
32
...
»

Содержание InteliMet Advantage 6































































Отзывы:

Нет отзывов