background image

Page 3

3002xTJ32 MANUAL - FORM 3002TJ-003

MODEL 3002xTJ32

ELECTROMAGNETIC LOCK

INSTALLATION  INSTRUCTIONS

02/07

705 Emmett Street    Bristol, CT 06010

 1-877-DynaLock    www.dynalock.com

Repeat process for second
armature mounting bracket.

ATTACH THE ARMATURE TO THE ARMATURE MOUNTING BRACKET

ASSEMBLE THE ARMATURE MOUNTING BRACKET 

Locate the two armature mounting bracket 
assembly screws and lock washers from 
the hardware kit and assemble the bracket 
as shown.

Firmly tighten the mounting screws with a 
5/32” hex wrench. They may be loosened 
later for adjustment, as necessary.

Attach the Armature Housing to the top Armature Mounting Bracket using four (4) 8-32x3/8” Armature Housing 
Screws.

Attach the armature to the armature mounting bracket as shown for LH door (Use alternate holes for RH door).  
Firmly tighten the Armature Mounting Screw using a 3/16” hex wrench.

Failure to properly secure the armature to the bracket could result in serious injury or possible security 
breach.

UPPER ARMATURE

BRACKET

LOWER ARMATURE BRACKET

LOCK WASHER

BRACKET ASSEMBLY SCREW

ARMATURE
 SPACER

FLAT
STEEL WASHER

ARMATURE

MOUNTING

SCREW

ARMATURE MOUNTING BRACKET

ARMATURE HOUSING

ARMATURE

ARMATURE HOUSING SCREW

Repeat process for second armature mounting bracket.

Содержание 3002 TJ32 Series













Отзывы: