Dynalink RTA1320, Руководство пользователя, Страница: 83 / 137

Chapter 4: Web Configuration
PPP Username & PPP Password:
n
r
Select this item to make a connection
by pressing the
Connect
Key in the username and password
that you received from your ISP.
Always On:
Select this item to make the
connection active all the time.
Dial on Demand:
Select this item to make a connectio
automatically while in demand. Enter
the timeout to cut off the network
connection if there is no activity fo
this router.
Manually Connect:
hyperlink on
the Advanced Setup – Internet –
Connections web page.
On the Configure LAN side Settings
& Subnet Mask:
Configure the secondary IP
Address and Subnet Mask:
Check this box to set up a secondary
t
second IP address and the
for
Start IP Address & End IP Address:
Enter the information needed.
Lease Time:
Key in the duration for the leased time.
The default is 1day.
DHCP Server Off:
Check this item if DHCP service is not
needed on the LAN.
page, you have to fill in the data
requested.
Primary IP Address
Key in the information that offered by
your ISP for the LAN connection.
IP Address to connect to your router if
they are not included in the range that
DHCP server accepts. See the nex
figure for the secondary IP address
and subnet mask.
Secondary IP Address & Subnet
Mask:
Key in the
subnet mask received from the ISP
your LAN connection.
MTU: (refer to the WAN section)
The default MTU value for LAN side
Settings is 1500. You may modify it if
necessary.
DHCP Server On:
Check this item if DHCP service is
needed on the LAN side. The router
will assign IP address and gateway
On this web page, the primary IP
address and subnet mask will be
shown on it. You can modify them
if needed.
address for each of your PCs.
Key in all the necessary settings
and click
Next for the coming
page.
71