Dynalink RTA1320, Руководство пользователя, Страница: 116 / 137

ADSL Router User Manual
Source IP/ Sub
Key in the source IP address (e
192.168.1.0 ) and subnet mask (ex.:
255.255.255.0 ) for the application (ex.
FTP, HTTP, and so on) that you want
to invoke the QoS traffic rule.
You ma
net Mask/ Port:
x.:
:
y
ort:
255.255.0 ) for the application
c
simply enter the source port , ranging
from 0 to 65535 , as the traffic
condition.
Destination IP/ Subnet Mask/ P
Enter the destination IP address
(ex.: 168.95.1.88 ) and subnet mask
(ex.: 255.
that you want to invoke the QoS traffi
rule.
Or simply enter the destination
port for the traffic condition; it ranges
from 1 to 65535 .
Traffic Priority/ DiffServ Class
(DSCP)/ WAN 802.1p:
Please refer to the Bridge QoS
section
.
After finishing the settings, click
Apply , the new QoS setting will be
shown as the example.
According to the example, we set four
rules for IP QoS. In traffic
A , w
the destinatio
e set
n port as 1-1024 , and
, the
nd
,
ource IP is 192.168.1.0 ,
, when
set, simply
Delete button.
the traffic priority is low ; in traffic B
source port is from 201 to 8000 , a
the priority is medium ; in traffic C
when the s
subnet mask is 255.255.255.0 , the
traffic priority is high ; in traffic D
the traffic is heading to 168.95.1.88 ,
the priority is high .
To delete the rules you
click the check button below
Delete
item and click
According to our example, the IP QoS configuration
following figure in the next page. can be illustrated by the
While there are many PCs
getting online, the PCs
using
port 201-8000 to
access the internet will have
medium traffic priority, the
PCs carrying 192.168.1.x/
255.255.255.0 as IP
address will have high
traffic priority. In addition,
PCs heading to
port 1-1024
will have a low priority, while
the PCs accessing
168.95.1.88 will have a high
priority.
104