background image

Dynalink® A 2704B Dual DAB + AM/FM Tuner with RS-232

3

Fig 3. REMOTE CONTROL {Red alternate functions for buttons}

1. 

Power ON/OFF - Affects only the section whose LED is lit.

2. 

Numeric keypad - Memory presets 1-10+

3. 

Direct {SHIFT} - Tune to a specific station using the numeric

keys to enter the frequency. Only affects the AM/FM tuner.

4. 

ASM – Auto Search Memory {INFO} - Auto Search Memory. 

Automatically scans the entire band (AM or FM) and stores
the strongest frequencies found in memory.

5. 

Memory {MENU} - This button can store a station frequency

into a Memory preset number. It can also activate the
Menus.

6. 

FM List - Displays list of stored FM station frequencies

7.

 MUTE – Sets volume level to zero. Mute mark appears LCD.

8.

 RDS – Radio Data Service {AUTO SCAN}

9.

 BAND – Toggle between AM and FM bands (Tuner Section)

and DAB+ / FM modes (DAB+ Section)

10.

 SLEEP [Timer] - Sets the duration for the playback timer that

counts down the minutes to power standby. Max 90 min. 

11.

 MO/ST - Mono/Stereo {ENTER} - Change between mono and

stereo mode for FM radio tuning. Enter is the same as
pressing the jog wheel.

12.

 DOWN / UP – Search up or down through frequencies. 

13.

 M-Down / M-Up – Scroll up or down through preset stations. 

14.

 TUNER / DAB – Toggle between the two tuners, left (Tuner A

= AM/FM) or right (Tuner B = DAB+/FM). 

General Operation

NOTE: While the Remote Control (Fig 3) and the front panel of each tuner (Fig 1) share some common 
function controls, a few functions are ONLY available using the Remote Control, namely: DIRECT, RDS, 
MUTE, ASM, MO/ST, TUNER/DAB. (ASM doubles as INFO button when the DAB+/FM tuner is active.)

- MUTE button functions with whichever tuner section is active, as determined by pressing the TUNER/
DAB button. When pressed, the word MUTE will flash on the screen.

- The LCD displays of each tuner will show the current frequency or Station ID for which each receiver is 
tuned, for whichever band or mode has been selected.

• POWER ON / OFF: The unit has a main POWER switch on the front panel (Fig 1, button 1). When 
switched ON the unit will power up both tuner display screens. If a tuner – either A or B – is not required, 
simply press the ‘POWER’ button applicable to that tuner. The POWER button on the Remote (See Fig 
3, button 1) is the same as the POWER buttons (Fig 1, buttons 3 & 18) on the front panel of each tuner 
section.

• SWITCHING BETWEEN THE DUAL TUNERS: On the Remote Control, press the TUNER/DAB button 
to toggle between which section (Left or Right) that the remote will control. A blue light on the front panel 
will be lit to indicate which tuner is under the remote’s control. The Power / Standby button will work with 
whichever section is under the control of the remote handset. The same is true for the MUTE, SLEEP, 
BAND buttons. Furthermore, all the red labels on remote control buttons will work when pressed during 
DAB section operation.

• TUNING A RADIO STATION: A station frequency can be located by pressing either the ‘UP’ or ‘DOWN’ 
buttons (Refer Fig 1 – Buttons 6 or 7 [Tuner AM/FM] and Buttons 22 or 23 [DAB]+ / FM). Holding the 

Содержание A 2704B









Отзывы: