background image

Dynalink® A 2704B Dual DAB + AM/FM Tuner with RS-232

Installation

1. 

The unit is supplied with separate RCA line level outputs for each tuner section. Connect the stereo 

RCA output(s) as required to a line level amplifier input.

2. 

Connect a suitable FM antenna to the FM antenna terminals, and connect the AM loop antenna to the 

AM antenna terminals. (Included)

3. 

Connect the provided IEC cable to the unit, and plug it in to a 240V a.c. mains outlet. Install the batter-

ies (supplied) in the remote control.

4. 

The battery compartment is located on the reverse of the remote control. Ensure the 2 x AAA batteries 

are inserted with the correct polarity.

5. 

Switch the mains outlet on.

CAUTION
• Do not use this unit where the temperatures are below 5°C
or exceeds 35°C.
• Do not attempt to clean with chemical solvents as this may cause damage. 
Use a clean, dry cloth. 

2

1. 

POWER - ON/OFF master switch

2. 

AM/FM TUNER - LCD Tuner A

3. 

Power ON/OFF - Tuner A Standby

4. 

BAND - AM/FM selection

5. 

SLEEP – Return to standby after a set period.

6. 

DOWN - Frequency (manual steps/auto search)

7. 

UP - Frequency (manual steps/auto search)

8. 

M.DOWN – Scroll down through stored memory

9. 

M.UP – Scroll up through stored memory stations

10. 

TUNER - Power LED for remote control LHS

11.

 MEMORY – Store frequency in preset memory

12.

 Tuner A Preset selection 1 to 5, 5+

13.

 DAB+/FM TUNER – LCD Tuner B

14.

 MODE – Switch between DAB+ and FM (like BAND) 

15.

 MENU – Choose functions for DAB+ and FM settings 

16.

 DAB - Power LED for remote control RHS

17.

 INFO – Scroll through the data transmitted for each band

18.

 POWER ON/OFF – Tuner B Standby

19.

 TUNE - Jogwheel FM / DAB+ stations, navigate menus, ENTER 

20.

 FM LIST – Displays list of stored FM station frequencies 

21.

 ENTER – Press to select a setting or function in Menu

22.

 UP – Station and frequency search up (manual/auto-scan) 

23. 

DOWN - Station and frequency search down

1. 

RS232 control port

2. 

DAB Ant (F-Type socket)

3. 

FM Ant (PAL socket)

4. 

AM Loop (Spring terminal)

5. 

DAB Out Level adjustment

6. 

DAB Out Stereo L/R RCA line 

7. 

Tuner Out Level adjustment

8. 

Tuner Out Stereo L/R RCA line

9. 

240V a.c. Mains IEC input

Fig 2. REAR PANEL

Fig 1. FRONT PANEL 

NOTE: On Tuner B, jogwheel 
performs the same functions as 
the front panel buttons 
UP / DOWN and ENTER. If the 
jogwheel is pressed for two 
seconds, it will auto scan and 
store stations in both DAB+ 
and FM modes (like ASM).

Содержание A 2704B









Отзывы: