Safety Regulations
2 — 18
03_0016_0505GB
The control cabinet, electrical wiring and drive motor pose a risk of
fatal injury from electrical contact during the following:
-- Setting up
-- Operation
-- Cleaning, Troubleshooting, Maintenance
-- Decommissioning.
All electrical assemblies are protected as standard, as per
IEC 60204 Part1 or DIN 40050 IEC 144 in accordance with protec-
tion category IP 54.
Use only original fuses with the specified amperage! The electrical
system can be destroyed by overrated fuses or overriding.
Heavy current
Work on the electrical system and equipment of the machine must
be carried out by a qualified electrician or by instructed persons un-
der the supervision and guidance of a qualified electrician and in
accordance with the electrical engineering rules and regulations.
2.13 Electrical contact
