background image

5

•  Children must be supervised by an adult to be safe.
•  Always be alert and ride your off-road electric scooter defensively. Watch out for 

obstacles that could catch one of the off-road electric scooter’s wheels or force 

you to turn suddenly and/or lose control. Be careful to avoid pedestrians, persons 

using other wheeled products (including roller or in-line skates, skateboards, 

scooters, bikes, etc.), children or animals who may enter your path. Always respect 

the rights and property of others.

•  Do not activate the speed control/throttle on the hand grip unless you are on the 

off-road electric scooter and in a safe, outdoor environment that is suitable for 

riding your off-road electric scooter.

•  Do not attempt or perform any stunts or tricks on the off-road electric scooter. 

The off-road electric scooter is not made to withstand abuse from jumping, curb 

grinding or any other type of misuse or stunting.

•  Do not ride on ramps, half pipes, skateboard parks, or empty swimming pools.
•  Keep both hands on the handlebars at all times.
•  Do not touch the motor or brakes on the off-road electric scooter when in use or 

directly after use as these parts can become extremely hot.

•  Never allow more than one person to ride the off-road electric scooter at one time 

and never try to tow anything.

•  Do not use near steps, water, or swimming pools.
•  Do not ride in wet or icy weather.
•  Never immerse the off-road electric scooter in water; electrical and drive components 

could be damaged by water or create other potentially unsafe conditions.

•  Keep your fingers and other body parts away from the chain, motor, steering 

system, wheels and all other moving components.

•  Do not ride while using a cell phone or other electronics or while wearing headphones.
•  Never hitch on to another vehicle or let yourself be pulled or pull anyone or 

anything while riding the off-road electric scooter.

•  Ride only on relatively smooth, flat, dry surfaces such as pavement or level ground 

without loose debris, such as sand, leaves, rocks or gravel. Water, mud, ice, 

bumpy, uneven, slick, or rough surfaces could impair traction and contribute to 

possible loss of control. Avoid excessive speeds that can occur from downhill rides 

which could cause loss of control.

•  Do not ride on hills and avoid excessive speed.
•  Avoid sharp turns, bumps, drainage grates, and other obstacles.
•  Do not ride at night or where there is limited visibility.
•  Do not ride indoors or on surfaces that could become damaged such as carpet or flooring.
•  Do not ride on streets, around cars, or in foot or vehicle traffic.
•  Regularly check the off-road electric scooter and its components. If any parts are 

broken or worn, do not ride the off-road electric scooter until you have fixed or 

replaced the broken or worn parts.

•  Units shall not be operated to perform racing, stunt riding, or other maneuvers, which 

may cause loss of control, or may cause uncontrolled operator/rider actions or reactions.

Содержание Surge





























Отзывы: