8
ASSEMBLY
Charger
(included)
Brake Lever
Hander Steerer
Tube
On/Off Key Switch
Twist Grip Throttle
Charge Port
Brushless Motor
Battery
Control Module
Charger Button
FRONT WHEEL ASSEMBLY:
Tools Required: 13mm wrench & 17mm wrench (included)
1. Gently remove the unassembled vehicle
from the carton.
2. Unscrew the front wheel axle from the front
fork.
3. Remove the steel sleeve outside the front
wheel axle. (The steel sleeve is only for
shipping purpose to protect the front fork
from damage.)
4. Find two steel spacers from the poly bag in the carton, slide the front wheel axle
into front fork hole as shown, then slide a steel spacer onto the axle before
inserting the axle into the front wheel.
Steel
Spacer
Front
Fork Hole
Steel Spacer
M10 X 20
Bolt
M10 X 60
Bolt
Remove
Steel
Sleeve