19
HOW TO REPLACE THE POWER SWITCH
1
2
3
1. Remove the power switch with a flat head screwdriver.
2. Unplug the main connector from the wire terminals as shown in the photo.
3. Push down the clips on both sides of the switch, take out the switch from the
holder, and then replace with a new switch.
Repeat the steps in reverse (to re-set the new switch into the holder; re-plug the
switch with the connector (making sure its direction is correct); and then replace
the holder back into the vehicle).
HOW TO REPLACE THE FOOT PEDAL
1. Turn the vehicle body on its side.
2. On the bottom of the vehicle, you will find a compartment which contains the foot
pedal. Push the button on side of the compartment as shown, so as to release the
foot pedal. (see Figure 1)
3. Pull the foot pedal off from the other side of the vehicle (the foot pedal side in the
cab). (see Figure 2)
4. Re-connect the new foot pedal to the cables, then insert the new foot pedal into
the foot pedal compartment on the deck of the vehicle (first make sure the tab on
the foot pedal is being inserted into the slot as shown in the diagram), then push
the foot pedal all the way in. (see Figure 3)
1
2
3