9
Steering wheel
M5x40
machine
screw
M5 nut
Up
M5x12
round
head
screw
Windshield
4. SEAT ASSEMBLY
• Insert the tabs at the back of the seat into
the slots in the vehicle body.
• Insert and tighten two M5 x 16 machine
screws with a screwdriver.
Tabs
Slots
M5x16
machine screw
Seat
5. SIDE VIEW MIRROR
ASSEMBLY
NOTE:
Identify the left and right mirrors for
assembly.
• Insert the side view mirror into the hole in
the front of the vehicle body and push until
you hear it click into place.
• Repeat for the other side.
Side view mirrors
2. STEERING WHEEL ASSEMBLY
• Turn the vehicle body upright.
• Remove the M5 x 40 machine screw and
M5 nut from the steering wheel with a
screwdriver.
• Insert the steering wheel onto the end of
the steering column, lining up the hole in
the steering wheel and the hole in steering
column. Reinsert the M5 x 40 machine
screw and M5 nut as shown in the photo,
and tighten it with a screwdriver.
3. WINDSHIELD ASSEMBLY
• Fit the tabs on the windshield into the slots in
the vehicle as shown
• Insert four M5 x 12 round head screws and
tighten them with a screwdriver.