background image

Safety

Danger!
High risk
: This symbol indicates an imminently hazardous situation such as "Dangerous
Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious bodily injury, or death.

!

Warning!
Medium risk
: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily injury.

!

Caution!
Low risk
: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of damage to the unit.

1.

Read these instructions. – All the safety and operating instructions should be read
before the apparatus or system is operated.

2.

Keep these instructions. – The important safety instructions and operating instructions
should be retained for future reference.

3.

Heed all warnings. – All warnings on the apparatus and in the operating instructions
should be adhered to.

4.

Follow all instructions. – All instructions for installation or use/operating should be
followed.

5.

Do no use this apparatus near water. – Do not use this apparatus near water or a moist
environment - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, near a swimming pool, in an unprotected outdoor installation, or any area
which is classified as a wet location.

6.

Clean only with dry cloth. – Unplug the apparatus from the outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners.

7.

Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions. –
 Openings in the enclosure, if any, are provided for ventilation and to
ensure reliable operation of the apparatus and to protect it from overheating. These
openings must not be blocked or covered. This apparatus should not be placed in a built-
in installation unless proper ventilation is provided or the manufacturer’s instructions
have been adhered to.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat or in direct sunlight.

9.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

10. Do not defeat the safety purpose of the polarized or ground-type plug. – A polarized

plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wider blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched particularly at plug,

convenience receptacles, and the point where they exit from the apparatus.

12. Only use attachments/accessories specified by the manufacturer. – Any mounting of the

apparatus should follow the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.

1

 

4

en | Safety

Promatrix 6000 Router

 

18-Jun-2015 | 03 | F01U306895

Operation manual

 

Содержание PMX-4R24



































Отзывы: