00-37723EZ1EA2
55
15. CRUISE
Cruise parameters can be set on this page.
RECORD START
Command dome to start to record “CRUISE PATH”.
STEP1: Press ‘ENTER’ to go into joystick mode. Dome will move blink words
to ‘RECORD END’ automatically.
STEP2: User can move camera to form a path.
STEP3: Press ‘ENTER’ to save the path.
RECORD END
Command dome to stop to record “CRUISE PATH”.
RUN CRUISE
Execute “CRUISE” function.
EXIT
Quit the CRUISE menu.
16. IR FUNCTION
“IR Cut Filter” function can be set on this page.
AUTO
THRESHOLD:
The Internal circuit will decide to remove the “IR Cut Filter”
according to its threshold value. You can set the sensitivity as
high then dome will remove the filter immediately if the
threshold value is reached. Of course, low sensitivity can
improve the reliability of lens.
IR COLOR:
You can program the video output as color or B/W when IR
function is enabled.
ON
Turn on IR function.
17. WDR SETTING
The parameter of WDR (Wide Dynamic Range) function can be set on this page.
WDR SWITCH
You can turn on/off the WDR function.
WDR FUNCTION
You can edit all parameters of WDR by yourself.
EXIT
Exit this page.
18. PRIVACY
You can program the privacy zone position with this option.
PRIVACY SWITCH
You can display “Privacy masks” with this option.
SHADE
The color of privacy mask can be selected through this option.
