WET DEBURRING STATION SAFETY INSTRUCTIONS
1. Always use a grounded power supply. There is an increased risk of
electric shock with an ungrounded power supply.
2. Don’t expose to rain or wet conditions. There is an increased risk of
electric shock if the switch, cord or motor are wet.
3. Do not abuse the power cord. Never use the cord to move the station.
Never use the cord to pull the plug from an outlet. A damaged cord
increases the risk of electric shock.
4. Use caution when opening or closing guards, screens, etc. Switch
power off and unplug cord before opening. Remove all work pieces
and tools before opening to avoid injury. Keep fingers and hands
clear when closing to avoid injury.
5. Never use to exhaust chemical vapors
6. Vibration may occur if unit is unlevel.
7. Unplug power cord when accessing blower compartment area.
8. Power switch must be off when servicing filter.
Model:
64100
(120 Volt AC)
Work Surface: 21" Long x 12" Deep.
Reorder No. PD08.12
Supersedes PD06.31
I M P O R TA N T S A F E T Y I N S T R U C T I O N S
S A F E T Y L E G E N D
Keep workplace area free
of contaminants while deburring.
When operating this equipment, basic precautions
should always be strictly followed including the instructions listed below:
21
"
Metalworking Station
Operating Manual
WARNING
Read and understand tool manual before
work starts to reduce risk of injury to
operator, visitors, and tool.
WARNING
Eye protection must be worn at all times,
eye protection to conform to ANSI Z87.1.
WARNING
Respiratory protection to be used when exposed to
contaminants that exceed the applicable threshold
limit values required by law.
WARNING
Practice safety requirements. Work alert,
have proper attire, and do not operate tools under
the influence of alcohol or drugs.
WARNING
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or
local statues, ordinances and/or regulations.
WARNING
Electric shock hazard. Avoid bodily contact with
grounded objects, bodies of water.
Do not damage cord set.
36"
9"
21"
12"
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
