4.13.3
Installing the SSD
To install the SSD, follow the steps below and refer to
Figure 4-10
.
1. Insert the
SSD
to the connector
CN1900
on the
System
Board (FSAPSY*)
slantwise.
2. Push down the
SSD
and secure it with the screw.
Figure 4-10 Installing the SSD
4.14 Smart Card slot
4.14.1
Removing the Smart Card slot
To remove the Smart Card slot unit, follow the steps below and refer to
Figure 4-11
to
Figure 4-13
.
1. Disconnect the
FPC (FSAPYN*)
from the connector
CN9602
on
the SYSTEM board and
CN9801
on the USB board.
To avoid damage, always hold the SSD only by its sides.
To prevent the SSD from being distorted when installing the SSD pack into the
computer, do not press the center of the SSD pack. Always hold the SSD pack by its
sides.
CN1900
SSD
Содержание PORTEGE X40-J Series
Страница 4: ......
