4.10.2
Installing the Base Assembly
To install the Base Assembly, follow the steps below and refer to
Figure 4-3
to
Figure 4-5
.
1. Set the Cover Assembly on the Base Assembly while securing
the latches.
Figure 4-5 Installing the Base Assembly
2. Secure the Cover Assembly and Base Assembly with the screws.
For models with 0GB/4GB/8GB/16GB memory module installed:
When replacing the Base Assembly with a new one, stick a new
INSU
BASE MEM
on the new Base Assembly in place.
INSU BASE MEM
When securing the Base Assembly, be sure to drive the screws in the order of the
number on
Figure 4-3
.
Содержание PORTEGE X40-J Series
Страница 4: ......
