dynabook Portege X30L-K Series, Руководство по обслуживанию

Страница: 59 / 136

Maintenance Manual (960-948) 3-7
Tests and Diagnostics
Others are the diagnostic tests. Move the cursor on the test item you want
to execute and press ENTER .
The following table shows the subtests names of each test.
After a subtest is selected, the following message may appear.
The meaning of each item is as follows:
■ Test Loop
Select No: After testing, the program returns to the screen to select Error
Stop and Test Loop item selection.
Select Yes: After testing, the pass count is increased by one, and the test is
performed again from the test top. Repeat the test until SHIFT
+ Q is entered.
The setting of Yes/No can be changed by pressing ENTER .
■ Error Stop
Select Yes: if any error occurs during the test, the test is suspended and
key input is required.
TEST
NO.
TEST
NAME
SUBTEST
No.
SUBTEST NAME
1 MEMORY 1 Main Memory Test
2 HDD/SSD
Test
1
2
3
4
5 Sequential Read Test
Partial Read Test
Address Jump Test
Address Uniqueness Test
Specify Address Test
3 Keyboard Test 1
2
Key-code Test
Touch Pad Test
4 LCD Panel
Test
1
2
3
4 LCD Panel Test
All dot on/off for LCD
H - pattern display
LCD brightness
5 Battery
Charge Test
- -
6 Fan Test - -
8 EXIT to TOP
Menu