13
MAINTENANCE
REPLACEMENT PARTS
1. Before cleaning, make sure the power has been turned off at the circuit
breaker panel and that the heating element of the heater is cool.
2. To maintain the external appearance of the heater, the unit occasionally needs
to be wiped with a dry duster. During the summer months, or at other times
when the appliance is not in use and is completely cold, it should be the wiped
over with a damp cloth.
3. Do not use abrasive clearing powders or furniture polish. Do not use chemical
or abrasive products, metallic scourers and so on, which may deteriorate the
surface, to clean the appliance.
4. During the summer months, or at other times when the appliance is not in
use, disconnect the power supply, and cover the whole appliance with a
dustcloth. Moreover, keep the appliance in a dry and cool place.
5. All other servicing should be performed by qualified service personnel. Do not
try to repair the heater yourself.
MAINTENANCE AND CLEANING
Part
Description
Part#
1
Back mesh
EG5000001AC
2
Hanging plate
EG5000002AC
3
Fan Blade
EG5000003AC
4
Air guide plate
EG5000004AC
5
Large handle seat
EG5000005AC
6
Small handle seat
EG5000006AC
7
Spring
EG5000007AC
8
Motor
EG5000008AC
Part
Description
Part#
9
Heater
EG7500001AC
10 Selection Switch
EG5000011AC
11 Main Board
EG7500DH001AC
12 Terminal block
EG5000014AC
13 Temperature CUT-OFF
EG5000017AC
14 Control Panel Circuit Board EG7500DH002AC
15 Control Panel box
EG7500DH003AC
16 Infrared Remote Control
EG7500DH004AC
