Dyna-Glo BF10DTDG-2 Скачать руководство пользователя страница 29

28

LIMITED WARRANTY:

This limited warranty is extended to the original retail purchaser of this Forced Air/Convection/Radiant Heater and warrants against any

defect in materials and workmanship for a period of one (1) year from the date of retail sale. GHP Group, Inc., at it’s option, will either 

provide replacement parts or replace or repair the unit, when properly returned to the retailer where purchased or one of our service centers

as directed by GHP Group, Inc., within one (1) year of retail purchase. (Shipping costs, labour costs, etc. are the responsibility of the purchaser.)

DUTIES OF THE OWNER:

This heating appliance must be operated in accordance with the written instructions furnished with this heater. This warranty shall not excuse

the owner from properly maintaining this heater in accordance with the written instructions furnished with this heater. A bill of sale, canceled

check or payment record must be kept to verify purchase date and establish warranty period. Original carton should be kept in case of warranty

return of unit.
WHAT IS NOT COVERED:

1.

Damage resulting from use of improper fuel.

2.

Damage caused by misuse or use contrary to the owners manual and safety guidelines.

3.

Damage caused by a lack of normal maintenance.

4.

Fuses

5.

Use of non-standard parts or accessories.

6.

Damage caused in transit. Freight charges on warranty parts or heaters to and from the factory shall be the responsibility of the owner.

This warranty does not imply or assume any responsibility for consequential damages that may result from the use, misuse, or the lack of

routine maintenance of this heating appliance. A cleaning fee and the cost of parts may be charged for appliance failures resulting from lack of
maintenance. This warranty does not cover claims which do not involve defective workmanship or materials. FAILURE TO PERFORM
GENERAL MAINTENANCE (INCLUDING CLEANING) WILL VOID THIS WARRANTY.

THIS LIMITED WARRANTY IS GIVEN TO THE PURCHASER IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE. THE

REMEDY PROVIDED IN THIS WARRANTY IS EXCLUSIVE AND IS GRANTED IN LIEU OF ALL OTHER REMEDIES. IN NO EVENT WILL

GHP GROUP, INC. BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. 

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not

allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.

CLAIMS HANDLED AS FOLLOWS:

1. Contact your retailer and explain the problem.

2. If the retailer is unable to resolve the problem, contact ourCustomer Service Dept. detailing the heater model, the problem, and proof

of date of purchase.

3. A representative will contact you. DO NOT RETURN THE HEATER TO GHP GROUP,INC. unless instructed by our Representative.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

TO REGISTER THE WARRANTY ON YOUR HEATER, PLEASE FILL OUT THIS CARD COMPLETELY

AND MAIL WITHIN 14 DAYS FROM DATE OF PURCHASE OR REGISTER ON-LINE AT www.ghpgroupinc.com

NAME: ______________________________________ PHONE: (

) __________________ EMAIL: ____________________________

ADDRESS: _________________________________ CITY: ______________________________ STATE: __________ ZIP: ____________

MODEL: ____________________ SERIAL #: _______________________________________ DATE PURCHASED: __________________

DEALER PURCHASED FROM: ____________________________________________ TYPE OF STORE: __________________________

CITY & STATE WHERE PURCHASED: ______________________________________________ PRICE PAID: _______________________

Please Take a Minute To Give Us Your Answers To The Following Questions.

All Responses Are Used Solely For Market Research And Are Held In Strict Confidence.

Who primarily decided this purchase?

Male

Female

18-24

25-39

40-59

60 and over

Purpose of Purchase? _______________________________________________________________________________________________

Do you own any other portable heaters? Yes No If yes, type____________________________brand_____________________

How do you intend to use your new heater?

Construction Site

Farm

Warehouse/Commercial

Garage/Outbuilding Other

How did you become aware of this heater?

In-Store Display

Newspaper Ad

Magazine Ad

Friend/Relative

TV Commercial

Store Salesperson Other ___________________________

What made you select this heater?

Style

Size/Portability

Price

Package

Brand

Other ___________________

Do you:

own

rent Would you recommend this heater to a friend?

Yes

No

Please give us your comments:________________________________________________________________________________________

THANK YOU FOR COMPLETING THIS FORM!

Information will be held confidential.

WARRANTY

IF WARRANTY SERVICE IS NEEDED . . .

1.  Contact customer service at 1-877-447-4768,

 

8:30 a.m. –  4:30

 

p.m., CST, Monday – Friday.  

Make sure you have your warranty, your sales receipt, and the model/serial number of your product.

2.  DO NOT ATTEMPT TO DO ANY SERVICE WORK YOURSELF.

The manufacturer warrants that your new product is free 

from manufacturing and material defects for a period of 

one year from date of purchase, subject to the following 

conditions and limitations.
1.  This product must be installed and operated at all 

times in accordance with the instructions furnished 

with the product. Any alteration, willful abuse, 

accident, or misuse of the product shall nullify this 

warranty.

2.  This warranty is non-transferrable, and is made to the 

original owner, provided that the purchase was made 

through an authorized supplier of the manufacturer.

3.  This warranty is limited to the repair or replacement 

of part(s) found to be defective in material or 

workmanship, provided that such part(s) have been 

subjected to normal conditions of use and service, 

after said defect is confirmed by the manufacturer’s 

inspection.

4.  The manufacturer may, at its discretion, fully 

discharge all obligations with respect to this warranty 

by refunding the wholesale price of the defective 

part(s).

5.  Any installation, labor, construction, transportation, or 

other related costs/expenses arising from defective 

part(s), repair, replacement, or otherwise of same, will

6.  not be covered by this warranty, nor shall the 

manufacturer assume responsibility for same. 

Further, the manufacturer will not be responsible for 

any incidental, indirect, or consequential damages, 

except as provided by law.

7.  All other warranties - expressed or implied - 

with respect to the product, its components and 

accessories, or any obligations/liabilities on the part 

of the manufacturer are hereby expressly excluded.

8.  The manufacturer neither assumes, nor authorizes 

any third party to assume, on its behalf,  

any other liabilities with respect to the sale of this 

product.

9.  The warranties as outlined within this document do 

not apply to non-manufacturer accessories used in 

conjunction with the installation of this product.

This warranty is void if:

a)  The product has been operated in atmospheres   

contaminated by chlorine, fluorine or other damaging 

chemicals.

b)   The product is subjected to prolonged periods of 

dampness or condensation.

c)   Any alteration, willful abuse, accident, or misuse 

of the product.

Содержание BF10DTDG-2































Отзывы: