labels. You may store as many labels as you
like until the memory is full, indicated by an
error flash warning. To make space in the
memory you can edit any stored label.
Extended memory allows you to store your
favorite labels in the memory. You can store
up to 70 characters in as many labels as
you like. Each label can have its own cha-
racteristics such as bold, underline, ...
To store a new label, simply press ---ll---
after the last label entered. To make space in
the memory, simply edit any label. To select
a label to print or edit, move the cursor any-
where within the label and press print. Move
the cursor with the
or
buttons or to
jump between labels, use
or
.
MULTIPLE COPIES
+
•
Your LabelMANAGER 100+ can provide
multiple copies within the range 1-20.
•
To use this facility press
H
then STYLE to
show
n = 1
on the display. To increase the
number of copies required press
. By
pressing
you can work backwards from 20.
To print the desired quantity press PRINT.
Note:
A row of vertical dots will print
between each label as a cutting guide.
INCREMENTAL NUMBERING
+
Labels can be printed in increments
of 1-20 automatically.
•
Key in your starting number as the right
most digit on the label. Press
H
then PRINT
the display will automatically move up a
digit to the next number. Press
H
then
PRINT to continue the sequence.
•
It is also possible to include
automatic
incremental numbering
when printing
multiple copies.
•
Key in your starting number, i.e. LABEL 1 .
•
Next press
H
then STYLE followed by
until the desired number of copies are
displayed i.e. 10.
Now press
H
then PRINT this will print ten
labels - LABEL 1 to LABEL 10.
•
It is possible to print up to 20 sequentially
numbered labels at any one time.
LAST LABEL MEMORY
•
The unit will store the last label text and
settings when turned off. Upon power-up,
these will be restored and displayed.
Removal of the batteries for more than a
few seconds will cause this information to
be lost.
Symbols and special characters
INTERNATIONAL CHARACTERS
To add a diacritical (accent) to create an
international character, enter the character
first, followed immediately by the diacritical,
i.e. press E followed by
H
then / to get
é
.
To add a diacritical to an existing character,
use
or
to place the cursor under the
character to be changed, then press the
appropriate diacritical key.
SYMBOLS
+
•
Press
H
+ SPACE
to show symbols and
special characters, some of which are not
available direct from the keyboard. The
display will show: A-Z Each letter selects
a line of symbol characters, as shown in
the table on page 2.
•
Press DEL to cancel, or press a letter key
‘A’ to ‘Z’ until you find the line of symbols
required.
•
Use
or
to select a symbol. Press
↵
to
place the symbol in the label.
7
ı
normal half-height
lextended full height
ı
extended, half-height.
The cursor will be positioned over the
current selection.
•
Either press DEL to exit, or use
or
to move the cursor over the size symbol
you require, then press ENTER to confirm
the selection, or PRINT to confirm the
selection and print the label.
VERTICAL TEXT
+
•
Press
H
+ BOX/UL
to rotate the text
through 90
˚
so that the text on the label is
printed
(i.e., it reads from top to bottom).
This is confirmed by the VERT indicator,
top right of the display.
•
Press again to cancel and return to hori-
zontal text (left to right).
Note:
Vertical text is not available on two
lines.
2-LINE PRINTING
•
Press
↵
to start the second line of text on
a two-line label. The two lines will be
printed half-height and ranged left, i. e.
« THIS IS A TWO
↵
LINE LABEL » in the
display will be printed as:
THIS IS A TWO
LINE LABEL
BOXED/UNDERLINED PRINTING
•
Press BOX/UL once to display the menu above.
•
Use
or
to move the cursor under the
desired option and press
↵
to enter. (Con-
firmed by the or
UNDLINE
indicator
displayed.)
•
To return to previously selected Box /
Underline text press DEL.
STYLE
Italic
and
O
Ou
uttlliin
nee
are accessible from STYLE.
When pressing STYLE a menu appears with
Italic
and
O
Ou
uttlliin
nee
.
or
will guide you to the
preferred option. To select your choice, press enter.
Note:
Italic and Outline can be used simultaneous-
ly but you’ll have to enter the STYLE menu twice.
•
Press again to cancel.
•
Use
or
to move the cursor under the
desired option and press
↵
to enter.
LABEL LENGTH
+
Displays the current label length. The length
is normally calculated automatically, accor-
ding to the length of the text on the label.
•
Press DEL to exit the length function
without changing the length, or:
•
Use
or
to increase (400mm / 15.6”max.)
or decrease the length (2mm / 0.1”) in
steps. The display will flash if you try
to make the label shorter than the text.
•
If the length displayed is preceded by the
symbol, the length has already been fixed;
the label is too short for the text and it will
not print. Either press
to increase the
length in 2mm / 0.2 inch steps until the
symbol disappears, or press
H
+ DEL CLEAR
to cancel fixed length; the label is now
long enough for the text and can be printed.
•
Press
↵
to fix the length for all subsequent
labels, confirmed by the LTH SET
indicator in the display, or
•
Press PRINT to fix the new length and
print the label.
•
Pressing
H
+ DEL will cancel the fixed
length and restore the automatic length.
EXTENDED MEMORY
•
Press ---ll---
Allows you to start a new label after stored
6
v
e
r
t
i
c
a
l
l
y
LM100+ US.qxd 26-09-2001 11:17 Pagina 8
