8
Tridak® Model 1200 Filling System User Guide
System Interconnect
1.
Plug the Power Plug into the Power Connection (Figure 3
) on the machine’s back panel.
2.
Connect the Footswitch to the Footswitch Jack (Figure 3
) on the machine’s back panel.
3.
Connect the supply air to the 1/4 NPT Air Inlet on the rear of the unit (Figure 3). Set the pressure to 65 psi
(0.44 MPa).
Figure 3. Connections (Rear Panel)
Installing Fill Tubing
Connecting Fill Tubing to the Dispensing Valves
1.
Remove the Tubing Retainer Plate from the dispensing valve.
2.
Cut one piece of 3/8" OD x 1/16" tubing to a length of 6 inches.
Note: 3/8"OD black polyethylene tubing is included with shipment. Bulk tubing of other material
compositions is available from Tridak.
3.
Position the fill tubing as shown (Figure 4), and press firmly into the Nozzle Block Fitting (Figure 4, A).
Footswitch Jack
Power Connection
¼ NPT Air Inlet (shown with plug inserted)
Power Switch
