11
Tridak® Model 1001 Syringe Filling System User Guide
Operation
Preparing the Cartridge
1.
Place pre-packaged, sealed Cartridge upright on a flat, stable working surface (Figure 5).
2.
With the Nozzle up, remove the Colored Cap, and quickly insert the Mating Fitting from the
Disposable Fluid Path (Figure 6). Tighten firmly.
3.
Ensure the Fluid Path is sealed with a Luer Fitting and Cap before transporting or loading the
Cartridge into the Reservoir Retainer.
NOTE: Low-viscosity fluids may require Teflon® wrap on threads.
Figure 5. Cartridge with Cap Installed
Figure 6. Cartridge with Fluid Path Installed
Nozzle
Remove Cap
