11
Dymax ECE Series UV Flood-Lamp Systems User Guide
Figure 4. ECE 5000
Reflector Housing
with Mounting Plate
Figure 5. ECE 5000
Reflector Housing with
Mounting Plate and Air
Plenum
Figure 6. Complete
Assembly
ECE 2000
–
Place the Mounting Plate for the ECE 2000 onto the Reflector Housing. Attach
the Mounting Plate with four M4 x 8 mm screws. (Figure 8)
Figure 7. ECE 2000 Reflector Housing
with Bracket
Figure 8. ECE 2000 Reflector Housing
with Mounting Plate Installed
6.
Place the Reflector Housing/Mounting Plate Assembly into the Shutter.
NOTE:
One side of the Mounting Plate has a third screw hole (Figure 9). When in the correct
position, this screw hole will be at the rear of the Shutter.
Figure 9. Reflector Housing/Mounting Plate Assembly, Third Screw Hole
ECE 5000 ECE 2000
7.
Using the M4 x 8 mm screws provided with the Shutter (Figure 10), secure the Light Shield and
Shutter to the Reflector Housing Mounting Plate Assembly.
