Dymax WIDECURE UV Conveyor
7
SPECIFICATIONS
SPECIFICATIONS
DESCRIPTION
18" CONVEYOR
25" CONVEYOR
Dymax Part Number
39380
39381
UV-CURING
INFORMATION
Bulb Curing Width
18" [45.7 cm]
25" [63.5 cm]
Peak Intensity
900 mW/cm
2
nominal
1
Energy @ 5 fpm
4.0 J/cm
2
nominal
1
Bulb Degradation
<20% degradation over 750 hours typical
UV Lamp Type
400 W/in metal halide Bulb (standard
2
)
Reflector Type
Focused
BELT
INFORMATION
Belt Width
25-7/8" [65.7 cm]
32-7/8" [83.5
cm]
Belt Working Height
Adjustable from 35” to 41” [88.9 cm to 104.1 cm] above
floor level
Belt Material
Teflon coated fiberglass
Belt Speed
Adjustable 1-50 fpm
Speed Control
Digital readout; 0.1 fpm increments; 2% accuracy
Maximum Belt Load
30 lbs [13.6 kg]
DIMENSIONS
Overall Dimensions
(L x W x H)
126" x 38" x 71"
[320 cm x 96.5 cm x 180.3 cm]
126" x 45" x 71"
[320 cm x 114.3 cm x 180.3 cm]
In-Feed Length
36" [91.4
cm]
Shroud Length
60" [152.4
cm]
Out-Feed Length
36" [91.4
cm]
Clearance and Lamp
Height
Adjustable from 5" to 24" [12.7 cm to 61.0 cm]
ELECTRICAL
INFORMATION
UV Lamp Electrical
Requirements
220 VAC
3
, 60 Hz, 50 Amps
220 VAC
3
, 60 Hz, 80 Amps
Single phase plus ground
Conveyor Electrical
Requirements
110 VAC, 60 Hz, 15 Amps
AIR FLOW
INFORMATION
Cooling Air Flow
600 CFM
900 CFM
Blower Duct
Dimensions
8" [20.3 cm] square
Replacement Bulbs
39376
– 18" Metal Halide (standard)
39613
– 18" Mercury
39373
– 25" Metal Halide (standard)
39614
– 25" Mercury
Shipping Weight
650 pounds
Lead Time
3-7 weeks, depending upon inventory
¹ Measured with an EIT Power Puck (320-395 nm) radiometer at a lamp height of 5"
² Can also be outfitted with mercury bulbs (aka shortwave, UVB, UVC, "H" type) for UV inks and cationics
³ Other UV lamp voltages are available upon request (208V, 420V, 460V)
